CALL OR EMAIL TO REQUEST A QUOTE! (614) 755-5091

Pneumatic Transmitters

Model Description Image
Model 511
Pressure to Current		 The Model 511000 P/I is a very rugged pneumatic-to-current or voltage transmitter using a solid-state strain gauge pressure transducer for the input signal and producing a linear D.C. current or voltage output signal. The transducer and electronics are housed in an all-steel case with front adjustable Zero and Span controls. The 511000 is a very dependable instrument designed for the general purpose instrumentation market where long life and durability are important.  Series 511
Model 512
Current to Pressure		 The 512 Series of I/P and E/P Transmitters are electro pneumatic devices providing conversion from current and voltage signals to proportional pneumatic signals. An integral pneumatic volume booster is included in the design to provide high flow capacity. Zero and Span controls are provided for rapid field calibration. The 512 Series is a very stable and accurate instrument for use in general- purpose instrumentation applications.  Series 512
Model 611000
Pressure to Voltage/ Current. DIN Rail Mount		 The Model 611000 transmitter converts an input gage positive pressure or vacuum to a proportional output current (P/I) or voltage (P/V). 1000 VDC of isolation is provided from the power supply to the output to eliminate ground shifts. The instrument is housed in a polyamide enclosure with an integral DIN rail mount allowing quick installation. The zero, span, and pressure port are located at the front of the unit to further facilitate installation and calibration.  Model 611000
Model 612
Current to Pressure/Voltage		 The Model 612000 is a new series of electro-pneumatic transducers that converts an electrical signal to a proportional output and uses a terminal block connector for electrical connections. It provides precision electro-pneumatic control to actuated valves, positioners, and final control elements and is ideally used for applications that require a vibration resistant and high-flow control device. The 612000 is designed for intrinsically safe service. It’s compact size and accessibility to parts and adjustments allow the unit to be installed in small, space-constraint locations. DIN rail and manifold assemblies are available in kits that provide multiple mounting points. An integral pneumatic volume booster is included in the unit design to provide high flow capacity up to 6.5 SCFM. Zero and span are calibrated by turning easily accessible adjusting screws on the front face of the unit. A thermistor circuit in series with the coil provides temperature compensation.  Model 612

Model Specs Image (click for larger)
511xxx Pressure to Current Pneumatic Instrument
512xxx Current to Pressure Pneumatic Instrument
611000 Pressure to Voltage/Current DIN Rail Mount Pneumatic Instrument
612xxx Current to Pressure/Voltage Pneumatic Instrument
568xxx AC Voltage Two-wire Isolated Transmitter
571xxx Thermocouple Two-wire Isolated Transmitter
572xxx DC Millivolt Two-wire Isolated Transmitter
596xxx AC Current Two-wire Isolated Transmitter
573xxx DC Current Two-wire Isolated Transmitter
574xxx DC Voltage Two-wire Isolated Transmitter
576xxx Slide Wire Two-wire Isolated Transmitter
577xxx RTD Two-wire Isolated Transmitter
578xxx Tachometer Two-wire Isolated Transmitter
523000 AC Current Four-wire Isolated Transmitter
618xxx Tachometer, DIN Railmount Options: Alarms, Open Circuit Input
505000 505 Manual Loading Station Manual Control of Loop
540xxx 540 Thermocouple Signal Alarm
541xxx 541 DC Current Signal Alarm
542xxx 542 DC Millivolt Signal Alarm
543xxx 543 DC Voltage Signal Alarm
544xxx 544 RTD Signal Alarm
545xxx 545 AC Voltage Signal Alarm
547xxx 547 Tachometer Signal Alarm
548xxx 548 Slidewire Signal Alarm
549xxx 549 Strain Gauge Signal Alarm
807xxx RTD Transmitter 2-Wire Head Mount, Explosion Proof, NEMA
815000 Loop Isolator 2-Wire Head Mount, Explosion Proof, NEMA
571004 Thermocouple, Indicating Close Coupled Temperature Transmitter
571006 Thermocouple, Non Indicating Close Coupled Temperature Transmitter
577004 RTD Indicating Close Coupled Temperature Transmitter
577066 RTD Non-Indicating Close Coupled Temperature Transmitter
577506 RTD Field Selectable Close Coupled Temperature Transmitter
680000 AC TO DC Power Supply 115/230V AC to 24V DC @ 250mA DC DIN Rail Mount 24V DC
681000 AC TO DC Power Supply 115/230V AC to 24V DC @ 630mA DC DIN Rail Mount 24V DC
580000 AC TO DC Power Supply 115/230V AC to 24V DC @ 125mA NEMA 4
580002 AC TO DC Power Supply 115/230V AC to 24V DC @ 125mA NEMA 7/9
WE-100 AC TO DC Power Supply 115V AC (optional 230) to 24V DC (optional 5 to 32V DC) @125mA DC
WE-103 AC TO DC Power Supply 115V AC to 5, 12, 15, 24V DC @ 2.4, 1.0, 0.8 & 0.56 A DC
WE-104 AC TO DC Power Supply 115V AC to 5 to 24V DC 1A to 500mA DC
WE-107 AC TO DC Power Supply 115V AC 5 to 24V DC 1.0A to 300mA DC
WE-108 AC TO DC Power Supply 115V AC 5 to 24V DC 2.4A to 0.56A DC
WE-109 AC TO DC Power Supply 115V AC 5 to 24V DC 6.0A to 1.5A DC
WE-110 DC TO DC Power Supply 115V AC 5 to 24V DC 6.0A to 1.5A DC
WE-111 DC TO DC Power Supply 12V DC to 62V DC to 5 to 24V DC
WE-114 AC TO DC Power Supply 115V AC to 24V DC 250mA Wall Mount
WE-117 AC TO DC Power Supply 115V AC to 5 to 24V DC @ 12.5 to 3.5A DC
WE-118 AC TO DC Power Supply 115V AC to 5 to 24V DC @ 25 to 5A DC
WE-119 AC TO DC Power Supply 115V AC to 5 to 24V DC @ 36 to 7.5A DC
WE-120 AC TO DC Power Supply 115V AC to 5 to 24V DC @ 50 to 11A DC
586000 LCD Digital Meter Digital Meter LCD Loop Powered 3 1/2 Digit NEMA 4X
594000 LCD Digital Meter Digital Panel Meter LCD Loop Powered 3 1/2 Digit
594001 LCD Digital Meter Digital Panel Meter LCD Loop Powered 3 1/2 Digit NEMA 4X
594002 LCD Digital Meter Digital Panel Meter LCD Loop Powered 3 1/2 Digit Explosion Proof
594004 LCD Loop Powered, Rate Surface Panel/Mount Digital Meter LCD Loop Powered 3 1/2 Digit NEMA 4/7/9 Explosion Proof
598000 LED Indicator Digital Panel Meter LED 3 1/2 Digit Panel Mount
598001 LED Indicator Digital Panel Meter LED 3 1/2 Digit NEMA 4X
598002 LED Indicator Digital Panel Meter LED 3 1/2 Digit Explosion Proof NEMA 7/9

Need some FAST information? Fill out this short form. We'll impress you with our rapid response!
*Your Name 
*Company 
*Phone 
*Email 
*Question or Interest? 
* Required Field

CALL OR EMAIL US TO REQUEST A QUOTE!

(614) 755-5091