Hazardous area enclosures available:
AM100: use
with AirMagnet SmartEdge Sensor A5020
(AirMagnet not included)
AP100:
use with Symbol part number AP-300 access point
(access point not included)
AP200: use with Cisco part
number AIR-AP1242G-A-K9
(not included) 2.4GHz side only
AP201:
use with Meru model
AP200 series (access point not included)
AP202:
use with Aruba AP70
number AP202 (access point not included). New models available for Aruba AP-92, AP-124, AP-134 MSR1200.
AP300:
use with Cisco part
number AIR-AP1242G-A-K9
(not included)
AP400: use with Cisco part
number AIR-LAP1262N-E-K9 or AIR-CAP3502E-A-K9
(neither included)
Ratings:
Class I, Div 1 Groups C & D
Don't
see the enclosure you need? Let us help configure one for you. We
typically do this at no charge! Call or
e-mail for details.
Hazardous Area Enclosures
Model AM100 - AirMagnet
The AM100 is designed to house the AirMagnet A5020. The hazardous area enclosure includes two Analynk CTX UL listed Class 1, Division 1 Groups C & D, Zone 1, ATEX Zone 1 antennas (one 2.4GHz & one 5.0Ghz), mounting bracket with hardware and two antenna to AirMagnet RF cables.
Hazardous Area Access Point Enclosure
Model AP100/200 - Symbol & Cisco
802.11 b/g access port designed for Class 1, Division 1 or Zone 1 locations. The AP100 and AP200 hazardous area access points are design to accommodate the Symbol AP-300 or Cisco AIR-AP1242AG-A-K9 access points respectively. The access points are utilized to extend the 802.11b/g network into the hazardous area. The design incorporates two Analynk CTX UL listed Class 1, Division 1, Groups C & D, Zone 1, ATEX Zone 1 antennas. The enclosure includes a mounting bracket, hardware and antenna cables to easily mount the Symbol or Cisco access points. The indicators on the Symbol access point are viewable through the glass window. Other access points may be used, contact the factory for more information.
Hazardous Area Access Point Enclosure Model AP201 - Meru The AP201 is designed to house the Meru AP200 series access points. The hazardous
area enclosure includes two Analynk CTX UL listed Class 1, Division
1, Groups C & D, Zone 1, ATEX Zone 1 antennas (2.4GHz and/or 5.0GHz),
mounting bracket with hardware and two antenna to AP200 RF cables. Hazardous Area Access Point Enclosure Model AP202 - Aruba The AP202 is designed to house the Aruba AP70 access point. The hazardous
area enclosure includes four Analynk CTX UL listed Class 1, Division
1, Groups C & D, Zone 1, ATEX Zone 1 antennas (two 2.4GHz & two 5.0GHz),
mounting bracket with hardware and four antenna to AP70 RF cables. New Aruba Enclosures now available: Hazardous Area Access Point Enclosure Model AP300 Cisco Dual Band The AP300 dual band (2.4GHz & 5GHz) hazardous
area access point enclosure is design to accommodate the Cisco AIR-AP1242AG-A-K9
(not included). The AP300 may be used to extend the 802.11a/b/g network
into the hazardous area. The enclosure includes four ( two 2.4GHz & two 5.0GHz) CTX UL listed Class 1, Division
1, Groups C & D, Zone 1, ATEX Zone 1 antennas. The
enclosure includes a mounting bracket, hardware and antenna cables. Other access points may be used,
contact the factory for more information. The 3" x 5" window
is optional. Hazardous Area Access Point Enclosure Model AP400 Cisco Dual Band The AP400 dual band (2.4GHz & 5GHz) hazardous
area access point enclosure is design to accommodate the Cisco AIR-LAP-1262N-E-K9 or AIR-CAP3502E-A-K9
(neither included). The AP400 may be used to extend the 802.11a/b/g network
into the hazardous area. The enclosure includes six ( three 2.4GHz & three 5.0GHz) CTX UL listed Class 1, Division
1, Groups C & D, Zone 1, ATEX Zone 1 antennas. The
enclosure also includes an internal mounting bracket, hardware and antenna cables. Other access points may be used,
contact the factory for more information.
AP600 for Aruba AP-92
AP601 for Aruba AP-134
AP602 for Aruba MSR1200
AP603 for Aruba AP-124