AP400 Hazardous
Area Access Point
Enclosure for Cisco 1262N or 3502E
now available!
New Hazardous Area Access Point Enclosures for Aruba models AP-92, AP-124, AP-134 & MSR1200 now available!
Expanded I/O for the A753/A750 RF products!
Increase the analog and digital inputs and/or outputs available with our new A16000 expansion module.
Click here for more information.
Hazardous area antennas now
available in Europe!
ATEX System joins
Analynk to distribute hazardous
area antennas to
the european community.
We specialize in process monitoring and control. Our wireless products have been implemented for a variety of applications including tank level, temperature (thermocouples), pressure, alarms, as well as standard 4-20mA transmission. Systems include long range 900MHz or low cost 2.4GHz. Power sources include 24Vdc, 120Vac, solar and battery.
Our basic wireless transceivers can replace a single 4-20mA signal with two discrete inputs/outputs. With our expansion modules each transmitter and
receiver can be expanded with multiple inputs and outputs at both the transmitter and receiver.
We also offer a broad line of wired process instruments, click on the Telmar Instruments tab above. Telmar instruments have been utilized in the process industry since the 1960s. Telmar products include RTD, T/C, I/P, P/I. power supplies and meters.
Industries served for wireless and wired products include: gas/oil, water, wastewater, pharmaceuticals, vineyards, petrochemical, gas detection.
Wireless - DC Powered
Combining simplicity and functionality in industrial RF transceivers, the A750 receiver and A753 transmitter offer quick installation and reliable transmission of a 4-20mA signal and two digital inputs and outputs.The A750 and A753 can operate in point to point or multipoint mode.
The A750-Mod transceiver sends and receives RS232/RS485 data and can operate as a Modbus RTU master or slave.
Wireless - Expansion Modules
Expansion modules are used to increase the number of inputs and outputs available on the A753 RF transmitter and/or A750 RF receiver. Both analog and digital inputs/outputs can be expanded. Communication between module and transmitter or receiver is accomplished via AnaBus.
Wireless - Repeater
To transmit/receive RF signals over obstacles or for greater distance the A759 RF repeater can be utilized. The A759 works in concert with the A750 receiver and A753 transmitter. The A759 will automatically detect the A750 and A753 and begin repeating, no setup required.
 |
Wireless - Demo Kit
Want to know if your application is a good candidate for wireless? Our demos can help answer two questions: 1) will the wireless system operate over the needed distance 2) will it be reliable? The demo kit includes one transmitter and one receiver, both battery powered. Place them at your desired locations, monitor the output and measure signal strength. Custom demo software makes testing quick and easy! |
 |
Hazardous Area Wireless
The A753-EXP houses the DIN rail model A753 RF transmitter in a hazardous area enclosure with explosion proof antenna. Input is 4-20mA and two discrete switches. The A753-EXP is designed for Class 1, Division 1, Groups C & D environments.
Wireless - Battery Powered Transmitters
The A753-BT-EXP operates from battery power and accepts a 4-20mA input and one discrete switch input. A built in regulated excitation voltage may be used to power external transducers (pressure, level etc). Available as DIN rail mount, explosion proof and NEMA 4.
Hazardous Area Antennas
The CTB, CTM, & CTX Series of antennas are designed for use in “Hazardous-Classified” and Industrial-Hardened applications. The antennas are omni-directional with 2.0 dBi gain and designed for flexible mounting.
Hazardous Area Access Point Enclosures
Hazardous area enclosures for Cisco, Symbol, Aruba, Meru, and AirMagnet access points. Enclosures include our patented antennas, mounting brackets with hardware and RF cables.
Alternative Energy
The model A650 may be implemented for installations that do not have power available. Designed for NEMA 4 applications and ideal to power wireless products.
Wireless Enclosure for Hazardous Area
The WEN series of hazardous area wireless
enclosures include our proprietary CTX antenna and a Class 1, Div 1 enclosure.
This allows the end user to quickly configure their own wireless products
for use in the hazardous area.
Custom RF cables with standard connectors (SMA, RPSMA BNC, TNC, RPTNC, MMCX and others) are available, contact us for a quote.
Antenna Accessories
Antenna mounting brackets and hazardous area fittings, high gain antennas.
Interested in distributing Analynk products?
We are looking for experienced process instrument distributors for several western states. If you specialize in utilities, gas and oil, water, waste water and/or other process industries we would be interested in hearing from you. To be considered for this position, please send your qualifications and contact information to:
Don't see the product you need?
We can take our basic products add displays, power supplies, HMIs, high gain antennas, even reconfigure inputs and outputs to fit your needs. Our systems go beyond what is on this website, contact us to discuss your application. See the following link for some of our recent system configuration: